Specifically made to the measurement you provide. These large cat or small dog PVC Board mounted doors install into your window frame in about 15 seconds. They require no drilling, cutting or permanent modifications of any type. Your existing window creates a weather tight seal,as well as weatherstripping on all 4 edges of the unit, so you won't feel any heat or cold coming through in the summer or winter. If you put it into an outside window, the window can still be secured and the door flap is lockable to keep your cats or dogs in or out. This also includes 4 way locking: in/out, in only, out only, locked.
These fit the largest of cats or small dogs up to 14" shoulder height.
Ol' Chubby will be bounding through this door in no time!
Can be made to fit windows up to 36" wide, or for side sliding windows up to 36" tall. Other sizes available upon request with an up-charge depending on length. Current build time is 5 to 7 days.
Thanks for your purchase!!! Now for the size! The unit’s 1/2" thick. Open your window slightly, the unit goes where the window used to sit. If the side track the window slides in is at least 1/2”, the unit slides into that track... so measure from inside the left track to the start of the right track .Then it’ll slide into left track, is short enough to clear right track lip, slides over about 3/8”into right track to center it.
If the track isn't 1/2, it butts to the track , not inside it, so you would take the measurement from track to track. If you are unsure, email pics of the window . Please email the sizing and/or sizing pics to firstname.lastname@example.org . Thanks again! Ken Gessner